Norton Economy Stones, 8"(AlO) and 6"(SiC) February 21, 2022 08:59PM |
Admin Registered: 2 years ago Posts: 504 |
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 22, 2022 05:41AM |
Admin Registered: 2 years ago Posts: 147 |
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 22, 2022 12:11PM |
Registered: 2 years ago Posts: 36 |
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 22, 2022 10:51PM |
Admin Registered: 2 years ago Posts: 504 |
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 22, 2022 10:54PM |
Admin Registered: 2 years ago Posts: 504 |
Quote
Millscale
Yesterday I too went to the hardware store and found a small sharpening stone simply labeled "corundum, double sided coarse/fine", bought it just to try out. Unfortunately, no grit ratings to speak of. After a little bit of sharpening I concluded this little inexpensive stones was as good as a Crystolon C/F, if not better grinding very fast on the coarse side and leaving a very sharp edge off the fine side (effortlessly slicing paper towel, similar to a 600 grit diamond finish)
Sometimes those cheap hardware store sharpening stones perform horribly, sometimes they bring crazy value, this was 5€ and I'll definitely buy spares.
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 22, 2022 10:58PM |
Registered: 2 years ago Posts: 256 |
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 23, 2022 10:40PM |
Registered: 2 years ago Posts: 36 |
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 23, 2022 10:59PM |
Registered: 2 years ago Posts: 256 |
Re: Norton Economy Stones, 8"(AlO) and 6"(SiC) February 24, 2022 11:39AM |
Admin Registered: 2 years ago Posts: 504 |